- Click Home tabBuild panelRoof
drop-downRoof By Footprint or Roof By Extrusion.
you try to create a roof on the lowest level, a dialog prompts you
to move it to a different level, ensuring that the roof is higher
than any walls joining to it. If you choose not to move the roof
to a different level, Revit Architecture notifies you later if the roof
is too low.
- Sketch the roof.
- If the roof is based on a footprint,
specify roof boundary lines as slope-defining, or use the roof slope
arrow to define the slope. See
- Click Finish Roof.
- Select the roof, and in the Type Selector
drop-down, select Sloped Glazing.
You can place curtain
grids on the curtain panels of the sloped glazing. Press Tab to
switch between horizontal and vertical grids.
Sloped glazing with
mullions and grid lines