Overview of Digitizing Objects
Concept Procedure Quick Reference
 
 
 
Note Before you begin digitizing, be sure you have configured your digitizer and registered your map.

To digitize the objects

  1. Check that TABLET is enabled in the status line. If not, double-click TABLET to enable Tablet mode.
  2. To use the MAPDIGITIZE command, set the digitizing options.
  3. Digitize lines by starting the LINE, PLINE, or MAPDIGITIZE command as appropriate.

    Press F12 to access menus and dialog boxes in the floating screen area you defined.

  4. Continue to add lines and arc segments until you are done. Press Enter.

When you finish digitizing, use Drawing Cleanup to clean the linework and fix errors.