Hole notes
Concept Procedure Quick Reference
 
 
 

Edit Hole Note

Modifies formatting and note text for a hole note. Overrides settings specified by the hole note style for the current document.

Access:

Right-click a hole note and select Edit Hole Note.

Hole type

Displays the hole type.

Edit Field

Edits the content of the note. Click a button in the Values and Symbols section to add the corresponding property to the note text. Click the arrow next to the Insert Symbol button to select and insert a symbol.

You can use a combination of text, inserted symbols, and variables to configure the annotation text of the note. For example:

C <DIST1> X <DIST2> would result in C 10 X 10

NoteTo stack text, type a correct stacking sequence , select it, right-click and choose Stack.

Options

Use Default sets hole note to the default format.

Tap Drill selects the Tap Drill hole note type.

Part Units sets the note to use the measurement units of the model. Check the box to use model units. Remove the check mark to use the measurement units specified by the dimension style.

Precision/Tolerance Settings opens the Precision and Tolerance dialog box so you can add tolerance information to values included in the note, or override the default precision settings.

Edit Quantity Note opens the Quantity Note dialog box. Allows custom configuration of the quantity note display in the context of a hole note (represented by the Quantity Note symbol).

Values and Symbols

Adds values and symbols to the Edit Field. Click a value or symbol to add it to the hole note. To remove, place the cursor after the value or symbol in the Edit Window and backspace.

Hole diameter

Hole depth

Counterbore/Spotface diameter

Counterbore/Spotface depth

Countersink hole diameter

Countersink hole angle

Countersink depth is calculated from model hole parameters. It is not a part modeling parameter.

Quantity note adds text to indicate quantity. Not displayed if the hole note is used inside a hole table or if the quantity is less than two.

Selects a symbol from the list to add to hole note.

 

Thread designation does not display if the thread has no thread information in part modeling.

Custom thread designation

Thread pitch

Thread class

Thread depth

Tap drill diameter

Fastener type indicates the fastener type used to define hole parameters in part modeling. Does not display if the feature has no fastener information.

Fastener size indicates the fastener size used to define hole parameters in part modeling. Does not display if the feature has no fastener information.

Fastener fit represents the fastener fit class used to define hole parameters in part modeling. Does not display if the feature has no fastener information.