Use the Sketch Properties toolbar
Concept Procedure Quick Reference
 
 
 

Use the Sketch Properties toolbar

You can view or apply attributes for new or selected sketch geometry. The toolbar is enabled in 2D Sketch mode for parts, assemblies, and drawings. It is also enabled outside of 2D Sketch mode for parts and assemblies when a valid 2D sketch is selected. Color changes to selected geometry are visible after the geometry is no longer selected.

Set attributes for new geometry
Modify attributes of selected geometry

To suppress user-defined attributes and display the default settings, press the Formatting Toggle button at the right-side of the toolbar.

Add another color to the Color Control pull-down list
Add another line type to the Linetype Control pull-down list
NoteThe line weight selection determines the actual thickness of the sketch geometry on the printed page. To change the way the line weight displays on the screen, see Document settings - Sketch tab.