The Pipe type exposes the following members.

Properties

  NameDescription
Public propertyApplication
Gets the Application. Not currently implemented.
(Inherited from Entity.)
Public propertyBearing
Gets the horizontal bearing for straight pipes, and chord bearing for curved pipes.
Public propertyConnectedPartCount
Gets the number of parts that connects to the part
(Inherited from Part.)
Public propertyCoverOfEndpoint
Gets the end point's cover of pipe.
Public propertyCoverOfStartPoint
Gets the start point's cover of pipe.
Public propertyCrossSectionalShape
Gets the pipe’s cross sectional shape, such as circular, egg-shaped, elliptical, or rectangular.
Public propertyCurve2d
Gets the pipe curve geometry in plan.
Public propertyDescription
Gets or sets the Entity object's description.
(Inherited from Entity.)
Public propertyDisplayName
Gets the Entity object's display name.
(Inherited from Entity.)
Public propertyDocument
Gets the Document. Not currently implemented.
(Inherited from Entity.)
Public propertyDomain
Gets the part's domain.
(Inherited from Part.)
Public propertyEndOffset
Gets the offset of the ending point for the pipe object.
Public propertyEndPoint
Gets or sets the endpoint of the Pipe.
Public propertyEndStation
Gets the station of the ending point for the pipe object.
Public propertyEndStructureId
Gets the end structure id of the Pipe. If no connected structure, return ObjectId::Null.
Public propertyEnergyGradeLineDown
Gets or sets the elevation of the hydraulic grade line for pipe networks flowing in a downstream direction and that contain hydraulic property data.
Public propertyEnergyGradeLineUp
Gets or sets the elevation of the energy grade line for pipe networks flowing in an upstream direction and that contain hydraulic property data.
Public propertyFlowDirection
Gets the current flow direction of the pipe, relative to the start and endpoint of the pipe.
Public propertyFlowDirectionMethod
Gets or sets the method that is used to determine the flow for this pipe.
Public propertyFlowRate
Gets or sets the pipe flow rate.
Public propertyHoldOnResizeType
Gets or sets how Structure should hold when resized.
Public propertyHydraulicGradeLineDown
Gets or sets the elevation of the hydraulic grade line for pipe networks flowing in a downstream direction and that contain hydraulic property data.
Public propertyHydraulicGradeLineUp
Gets or sets the elevation of the hydraulic grade line for pipe networks flowing in an upstream direction and that contain hydraulic property data.
Public propertyInnerDiameterOrWidth
Gets the inner diameter or inner width of the pipe.
Public propertyInnerHeight
Gets the inner height of the pipe in drawing units.
Public propertyIsReferenceObject
Gets whether the Entity is a reference object. A reference object is located in another drawing, and linked using a data shortcut or Vault. If the entity is native to the current drawing this property returns false; if it is being referenced via data shortcuts or AutoCAD Vault it returns true.
(Inherited from Entity.)
Public propertyIsReferenceStale
For reference objects (IsReferenceObject == true), gets whether the Entity object's reference is stale.
(Inherited from Entity.)
Public propertyIsReferenceSubObject
For reference objects (IsReferenceObject == true), gets whether the Entity is a reference subobject. For example, when iterating through the structure of a pipe network referenced from another drawing, this property is true for each entity.
(Inherited from Entity.)
Public propertyIsReferenceValid
For reference objects (IsReferenceObject == true), gets whether the Entity object's reference is valid. This indicates whether the referenced object can be found.
(Inherited from Entity.)
Public propertyJunctionLoss
Gets or sets the pipe junction loss.
Public propertyLength2D Obsolete.
Use Autodesk.Civil.Pipe.Length2DCenterToCenter instead.
Public propertyLength2DCenterToCenter
Gets the two-dimensional length of the pipe, measured from the center of the connected starting structure to the center of the connected ending structure.
Public propertyLength2DToInsideEdge
Gets the two-dimensional length of the pipe, measured from the inside edge of the connected starting structure to the inside edge of the connected ending structure.
Public propertyLength3D Obsolete.
Use Autodesk.Civil.Pipe.Length3DCenterToCenter instead.
Public propertyLength3DCenterToCenter
Gets the three-dimensional length of the pipe, measured from the center of the connected starting structure to the center of the connected ending structure.
Public propertyLength3DToInsideEdge
Gets the three-dimensional length of the pipe,measured from the inside edge of the connected starting structure to the inside edge of the connected ending structure.
Public propertyMaterial
Gets the material defined for this part.
(Inherited from Part.)
Public propertyMaximumCover
Gets the maximum depth of cover along the entire length of pipe, from the top outside of the pipe to the reference surface.
Public propertyMinimumCover
Gets the minimum depth of cover along the entire length of pipe, from the top outside of the pipe to the reference surface.
Public propertyName
Gets part's name.
(Inherited from Part.)
Public propertyNetworkId
Gets the object id of the network to which this part belongs
(Inherited from Part.)
Public propertyNetworkName
Gets the name of the network to which this part belongs
(Inherited from Part.)
Public propertyOuterDiameterOrWidth
Gets the outer diameter or outer width of the pipe.
Public propertyOuterHeight
Gets the outer height of the pipe in drawing units.
Public propertyOverrideRuleSet
Gets or sets whether to use overridden rules.
(Inherited from Part.)
Public propertyParamsBool
Gets the boolean parameters collection.
(Inherited from Part.)
Public propertyParamsDouble
Gets the double parameters collection.
(Inherited from Part.)
Public propertyParamsLong
Gets the long parameters collection.
(Inherited from Part.)
Public propertyParamsString
Gets the string parameters collection.
(Inherited from Part.)
Public propertyPartData
Gets or sets the part data record.
(Inherited from Part.)
Public propertyPartDefId
Gets the object id of PartDef.
(Inherited from Part.)
Public propertyPartDescription
Gets the part’s description.
(Inherited from Part.)
Public propertyPartSizeName
Gets the part size name.
(Inherited from Part.)
Public propertyPartSubType
Gets the part’s subtype.
(Inherited from Part.)
Public propertyPartType
Gets the type of the network park.
(Inherited from Part.)
Public propertyPosition
Gets or sets the position of the network part.
(Inherited from Part.)
Public propertyProfileViewPartId
Gets the object id of the part's counterpart in profile views.
(Inherited from Part.)
Public propertyRadius
Gets the radius of the pipe.
Public propertyRefAlignmentId
Gets or sets the object id of the alignment which this part references.
(Inherited from Part.)
Public propertyRefAlignmentName
Gets the name of the alignment which this part references
(Inherited from Part.)
Public propertyRefSurfaceId
Gets or sets the object id of the surface that this part references.
(Inherited from Part.)
Public propertyRefSurfaceName
Gets the name of the surface which this part references.
(Inherited from Part.)
Public propertyReturnPeriod
Gets or sets the pipe return period.
Public propertyRuleSetStyleId
Gets or sets the object id of RuleSetStyle.
(Inherited from Part.)
Public propertyRuleSetStyleName
Gets or sets RuleSetStyle by name.
(Inherited from Part.)
Public propertySectionViewPartId
Gets the object id of the part's counterpart in section views.
(Inherited from Part.)
Public propertyShowToolTip
Gets or sets whether to show tooltips for the Entity.
(Inherited from Entity.)
Public propertySlope
Gets the pipe’s slope in absolute value.
Public propertySolid3dBody
Gets the 3d solid body of the part.
(Inherited from Part.)
Public propertyStartOffset
Gets the offset of the starting point for the pipe object.
Public propertyStartPoint
Gets or sets the start point of the Pipe.
Public propertyStartStation
Gets the station of the starting point for the pipe object.
Public propertyStartStructureId
Gets the start structure id of the Pipe. If no connected structure, return ObjectId::Null.
Public propertyStyleId
Sets the Pipe's style Id.
(Overrides Entity..::..StyleId.)
Public propertyStyleName
Gets or sets the Entity object's style name.
(Inherited from Entity.)
Public propertySubEntityType
Gets the type of the pipe.
Public propertySurfaceId Obsolete.
Gets or sets the object id of the surface that this part references.
(Inherited from Part.)
Public propertyWallThickness
Gets the wall thickness for this structure, measured from the inside edge of the structure to the outside edge of the structure.
(Inherited from Part.)

See Also