SPLINESEGS
 
 
 
Quick Reference
Type: Integer
Saved in: Drawing
Initial value: 8

Sets the number of line segments to be generated for each spline-fit polyline generated by the Spline option of the PEDIT command.

Enter a non-zero integer between -32768 to 32767. If you set SPLINESEGS to a negative value, segments are generated using the absolute value of the setting and then a fit-type curve is applied to those segments. Fit-type curves use arcs as the approximating segments. Using arcs yields a smoother generated curve when few segments are specified, but the curve can take longer to generate.