BREAK
 
 
 
Quick Reference

Breaks the selected object between two points.

Access Methods

Button

 Ribbon: Home tabModify panelBreakNot available on the ribbon in the current workspace.
 Ribbon: Home tab Modify panelBreak at PointNot available on the ribbon in the current workspace.
 Menu: ModifyBreakNot available in menus in the current workspace.
 Toolbar: Modify 

Summary

You can create a gap between two specified points on an object, breaking it into two objects. If the points are off of an object, they are automatically projected on to the object. break is often used to create space for a block or text.

List of Prompts

The following prompts are displayed.

Select object: Use an object selection method, or specify the first break point (1) on an object

The prompts that are displayed next depend on how you select the object. If you select the object by using your pointing device, the program both selects the object and treats the selection point as the first break point. At the next prompt, you can continue by specifying the second point or overriding the first point.

Specify second break point or [First point]: Specify the second break point (2) or enter f

Second Break Point

Specifies the second point to use to break the object.

First Point

Overrides the original first point with the new point that you specify.

Specify first break point:

Specify second break point:

The portion of the object is erased between the two points that you specify. If the second point is not on the object, the nearest point on the object is selected; therefore, to break off one end of a line, arc, or polyline, specify the second point beyond the end to be removed.

To split an object in two without erasing a portion, enter the same point for both the first and second points. You can do this by entering @ to specify the second point.

Lines, arcs, circles, polylines, ellipses, splines, donuts, and several other object types can be split into two objects or have one end removed.

The program converts a circle to an arc by removing a piece of the circle starting counterclockwise from the first to the second point.

You can also break selected objects at a single point with the Break at Point tool.

Valid objects include lines, open polylines, and arcs. Closed objects such as circles cannot be broken at a single point.