Quick Reference

Controls the filling of objects such as hatches, 2D solids, and wide polylines.

Access Methods

 Command entry: 'fill for transparent use

List of Prompts

The following prompts are displayed.

Enter mode [ON/OFF] <current>: Enter on or off, or press Enter


Turns on Fill mode. For the filling of a 3D object to be visible, its extrusion direction must be parallel to the current viewing direction, and hidden lines must not be suppressed.


Turns off Fill mode. Only the outlines of objects are displayed and plotted. Changing Fill mode affects existing objects after the drawing is regenerated. The display of lineweights is not affected by the Fill mode setting.