MeshSmooth Modifier
Bottom of the Page

Modify panel Make a selection. Modifier List Object-Space Modifiers MeshSmooth

Make a selection. Modifiers menu Subdivision Surfaces MeshSmooth

The MeshSmooth modifier smoothes geometry in your scene by means of several different methods. It lets you subdivide the geometry while interpolating the angles of new faces at corners and edges, and apply a single smoothing group to all faces in the object. The effect of MeshSmooth is to round over corners and edges as if they had been filed or planed smooth. Use MeshSmooth parameters to control the size and number of new faces, and how they affect the surface of the object.

Angular model (shown on the right) changed to a smooth model with MeshSmooth

You can use MeshSmooth to produce a Non-Uniform Rational MeshSmooth object (NURMS for short). A NURMS object is similar to a NURBS object in that you can set different weights for each control vertex. You can further control the object's shape by changing edge weights.

MeshSmooth's effect is most dramatic on sharp corners and least visible on rounded surfaces. Use MeshSmooth on boxes and geometry with crisp angles. Avoid using it on spheres and similar objects.

TipTo better understand MeshSmooth, create a sphere and a cube and apply MeshSmooth to both. The cube's sharp corners become rounded, while the sphere's geometry becomes more complex without changing shape significantly.
NoteHaving an animated deformer placed before a meshsmoothed object that has had control level editing can result in the meshsmoothed object becoming distorted. It's recommended that deforming modifiers be placed after the MeshSmooth modifier in the stack if you're using the deformers for animation.
See Also


To apply MeshSmooth to an object:

  1. Select an angular object.
  2. Apply the MeshSmooth modifier.
  3. Set MeshSmooth parameters.

To apply MeshSmooth to sub-objects:

  1. Select an object.
  2. Apply a Mesh Select modifier.
  3. Select a group of vertices or faces.
  4. Apply MeshSmooth.
  5. In the Subdivision Method rollout, turn off Apply To Whole Mesh.

    This lets MeshSmooth work only on the sub-object selection.

  6. Set MeshSmooth parameters.


Modifier Stack


At this sub-object level you can transform or edit vertices in the smoothed mesh.


At this sub-object level you can transform or edit face edges in the smoothed mesh.

See Local Control rollout.

For more information on the stack display, see Modifier Stack.

Subdivision Method rollout

Subdivision Method list

Choose one of the following to determine the output of the MeshSmooth operation:

  • NURMSProduces Non-Uniform Rational MeshSmooth object (NURMS for short). The Strength and Relax smoothing parameters are unavailable with the NURMS type.

    A NURMS object is similar to a NURBS object in that you can set different weights for each control vertex. You can further control the object's shape by changing edge weights. See Display/Weighting group, following, for further information on changing weights.

  • ClassicProduces three- and four-sided facets. (This is the same as applying MeshSmooth in version 2.x without turning on Quad Output.)
  • Quad OutputProduces only four-sided facets (assuming you don't look at the hidden edges, since the object is still made up of triangular faces). If you apply this with default parameters to a whole object, like a box, it's topologically exactly the same as Tessellate, edge-style. However, rather than using tension to project face and edge vertices out of the mesh, use the MeshSmooth Strength to relax the original vertices and the new edge vertices into the mesh.
Apply To Whole Mesh

When turned on, any sub-object selection passed up the stack is ignored and MeshSmooth is applied to the entire object. Note that the sub-object selection is still passed up the stack to any subsequent modifiers.

Old Style Mapping

Uses the 3ds Max version 3 algorithm to apply MeshSmooth to the mapping coordinates. This technique tends to distort the underlying mapping coordinates as it creates new faces and as texture coordinates shift.

Effect of MeshSmooth with two iterations on a cube and different iteration method:


B. Quad

C. Classic

D. Original object with no MeshSmooth

Subdivision Amount rollout

Sets how many times to apply MeshSmooth.


Sets the number of times the mesh is subdivided. When you increase this value, each new iteration subdivides the mesh by creating smoothly interpolated vertices for every vertex, edge, and face from the iteration before. The modifier then subdivides the faces to use these new vertices. Default=0. Range=0 to 10.

The default value of 0 iterations allows you to modify any setting or parameter, such as the type of MeshSmooth or the update options, before 3ds Max starts subdividing the mesh.

NoteBe cautious when increasing the number of iterations. The number of vertices and faces in an object (and thus the calculation time) can increase as much as four times for each iteration. Applying four iterations to even a moderately complex object can take a long time to calculate. You can press Esc to stop calculation; this also automatically sets Update Options to Manually. Reduce the Iterations value before setting Update Options back to Always.

Determines how sharp a corner must be before faces are added to smooth it. Smoothness is calculated as the average angle of all edges connected to a vertex. A value of 0.0 prevents the creation of any faces. A value of 1.0 adds faces to all vertices even if they lie on a plane.

TipTo subdivide only sharp edges and corners, use a Smoothness value of less than 1.0. To see the subdivisions in Wireframe/Edged Faces viewports, turn off Isoline Display.
Render Values

These let you apply a different number of smoothing iterations and a different Smoothness value to the object at render time. Typically you would use a low number of iterations and a lower Smoothness value for modeling, and higher values for rendering. This lets you work quickly with a low-resolution object in the viewports, while producing a smoother object for rendering.


Lets you choose a different number of smoothing iterations to be applied to the object at render time. Turn on Iterations, and then use the spinner to its right to set the number of iterations.


Lets you choose a different Smoothness value to be applied to the object at render time. Turn on Smoothness, then use the spinner to its right to set the smoothness value.

From right to left, effect of increasing the number of iterations

Local Control rollout

Sub-object Level

Turns Edge or Vertex level on or off. When both levels are off, you're working at the object level. Information about the selected edges or vertices is displayed in the message area under the Ignore Backfacing check box.

Ignore Backfacing

When on, selection of sub-objects selects only those sub-objects whose normals make them visible in the viewport. When off (the default), selection includes all sub-objects, regardless of the direction of their normals.

Control Level

Allows you to see the control mesh after one or more iterations and to edit sub-object points and edges at that level. Transform controls and the Weight setting are available for all sub-objects at all levels. The Crease setting is available only at the Edge sub-object level.


Creates a discontinuity on a surface so you get a hard edge, such as a wrinkle or lip. You select one or more edge sub-objects and adjust the Crease setting; the crease appears in the surfaces associated with the selected edges. Available only at the Edge sub-object level.


Sets the weight of selected vertices or edges. Increasing a vertex weight "pulls" the smoothed result toward that vertex. Edge weights are more complex and behave in an opposite manner in some respects. They aren't really "weights" as such, but "knot intervals," in NURBS terminology. Consequently, increasing an edge weight tends to push the smoothed result away. Kinks will form in the result if weights of 0 are used.

Isoline Display

When on, 3ds Max displays only isolines: the object's original edges, before smoothing. The benefit of using this option is a less cluttered display. When off, 3ds Max displays all faces added by MeshSmooth; thus, higher Iterations settings (see Subdivision Amount Rollout) result in a greater number of lines. Default=on.

Show Cage

Toggles the display of a two-color wireframe that shows the modified object before subdivision. The cage colors are shown as swatches to the right of the check box. The first color represents unselected edges at the Vertex sub-object level, and the second color represents unselected edges at the Edge sub-object level. Change a color by clicking its swatch.

Soft Selection rollout

Soft Selection controls affect the action of sub-object Move, Rotate, and Scale functions. When these are on, 3ds Max applies a spline curve deformation to unselected vertices surrounding the transformed selected sub-object. This provides a magnet-like effect with a sphere of influence around the transformation.

For more information, see Soft Selection Rollout.

Parameters rollout

Parameters rollout > Smoothing Parameters group

These settings are available only when MeshSmooth Type is set to Classic or Quad Output. Also, Project To Limit Surface is available only in Classic mode.


Sets the size of the added faces using a range from 0.0 to 1.0.

  • Values near 0.0 create small faces that are very thin and close to the original vertices and edges.
  • Values near 0.5 size faces evenly between edges.
  • Values near 1.0 create large new faces and make the original faces very small.

Applies a positive relax effect to smooth all vertices.

Project to Limit Surface

Places all points on the "limit surface" of the MeshSmooth result, which is the surface that would be produced after an infinite number of iterations. The topology is still controlled by the number of iterations.

Parameters rollout > Surface Parameters group

Applies smoothing groups to the object and restrict the MeshSmooth effect by surface properties.

Smooth Result

Applies the same smoothing group to all faces.

Separate by Materials

Prevents the creation of new faces for edges between faces that do not share Material IDs.

Separate by Smoothing Groups

Prevents the creation of new faces at edges between faces that don't share at least one smoothing group.

Settings rollout

Settings rollout > Input Conversion group

Operate On Faces/Polygons

Operate On Faces treats every triangle as a face and smoothes across all edges, even invisible edges. Operate On Polygons ignores invisible edges, treating polygons (like the quads making up a box or the cap on a cylinder) as a single face.

Keep Faces Convex

(Available only with Operate On Polygons mode.) Keeps all input polygons convex. Selecting this option causes non-convex polygons to be handled as a minimum number of separate faces, each of which is convex. (Turn on Display/Weighting group Display Control Mesh to see what's happening here.)

"Convex" means that you can connect any two points in the polygon with a line that doesn't go outside the polygon. Most letters aren't convex. In the capital letter "T," for example, you can't connect the upper-left corner to the bottom with a straight line without going outside the shape. Circles, rectangles, and regular polygons are all convex.

Problems that can occur with non-convex faces include the fact that changes in the geometry of the input object can result in a different topology for the MeshSmooth result. For instance, in a box, if you drag one of the top corners across the middle of the top face, the box becomes non-convex. MeshSmooth would then see this as two triangles instead of one quad, and the number of points in the result would change.

If you need to make sure your output topology is stable, turn this off. If you have a lot of letters or other non-convex faces in your mesh, however, you'll probably want it on.

Settings rollout > Update Options group

Sets manual or render-time update options, for situations where the complexity of the smoothed object is too high for automatic updates. Note that you can also set a greater degree of smoothing to be applied only at render time, on the Subdivision Amount rollout.


Updates the object automatically whenever you change any MeshSmooth settings.

When Rendering

Updates the viewport display of the object only at render time.


Turns on manual updating. When manual updating is selected, any settings you change don't take effect until you click the Update button.


Updates the object in the viewport to match the current MeshSmooth settings. Works only when you choose When Rendering or Manually.

Resets rollout

This rollout allows you to go back to default or initial settings on any changes you made such as sub-object transforms (geometric edits), and changes to edge creases, vertex weights, and edge weights.

You can reset changes for all control levels or to the current control level. Turn on the reset option for the sub-object level you want, and then click the appropriate button.

Reset All Levels

Returns to the default or initial settings for geometric edits, creases, and weights for all sub-object levels.

Reset This Level

Returns to the default or initial settings for geometric edits, creases, and weights for the current sub-object level.

Reset Geometric Edits

Returns to the default or initial settings for any transforms made to vertices or edges.

Reset Edge Creases

Returns to the default or initial setting for edge creases.

Reset Vertex Weights

Returns to the default or initial setting for vertex weights.

Reset Edge Weights

Returns to the default or initial setting for edge weights.

Reset Everything

Returns to the default or initial setting for everything.