Autodesk Stone
 
 
 
Bottom of the Page

Material/Map Browser Choose Autodesk Stone.

Note: The Stone material appears in the Browser only if mental ray or Quicksilver is the active renderer.

This material has the appearance of stone.

Autodesk Stone used as facing for the flat walls of the building

Interface

Stone rollout

Image

Click to choose a bitmap that defines the surface appearance of the stone material.

Finish

Sets the finish used for the stone surface.

  • Polished(The default.)
  • Glossy
  • Matte
  • Unfinished

Finish Bumps rollout

Enable

When on, the material uses a bump pattern for its finish. Default=off.

Type

Lets you choose a preset pattern for the bump pattern, or choose a custom pattern.

  • Polished Granite(The default.)
  • Stone Wall
  • Glossy Marble
  • Custom
Image

When Custom is active, click to specify a bitmap for the bump pattern.

Amount

Controls the height of the finish bumps. Range: 0.0 to 1.0. Default=0.05.

Relief Pattern rollout

Enable

When on, applies a relief pattern to the material. Default=off.

Image

Click to specify a bitmap for the relief pattern.

Amount

Controls the height of the relief. Range: 0.0 to 2.0. Default=0.25.